Turning Inserts: Carbide Cutter & Lathe Tools Expert
As the core manufacturer of carbide tools, we focus on innovation in the field of turning, With Carbide Insert Lathe Tools, Cutting Carbide Inserts, Carbide Cutter Inserts, Inserts for Turning, four product matrices, to provide global users with accurate and adaptive metal processing solutions.
What are the advantages of our Inserts for Turning
1、Super hard matrix, challenge the limit processing
Using nano grain (0.5μm grade) cemented carbide substrate, hardness of 93.5HRA, collapse resistance increased by 60% :
Single blade life over 120 minutes when roughing cast iron
The surface roughness of refined hardened steel (HRC55) remains stable at Ra0.8
2、Intelligent coating, high temperature is not compromised
PVD+PCVD composite coating technology, 8μm gradient protection layer:
Anti-oxidation temperature exceeded 1100℃
Stainless steel turning speed up to 350m/min
We reduce the incidence of chip nodules in titanium alloy processing by 75%.
3、Geometric revolution, efficiency multiplier
A double-sided 16-edge design increases the utilization rate by 200% and reduces the processing cost of a single piece.
0.02mm cutting edge passivation: eliminate microscopic breakage, and the size fluctuation of fine copper parts is less than 5μm
Adaptive chip breaker: From continuous chip to C-chip one-key matching, chip removal fluency increased by 90%
Four core scenarios
| Domain | Typical case | performance |
| Automotive | Engine crankshaft journal turning | Single blade processing 120 pieces, CPK value ≥ 1.67 |
| Aerospace | Titanium alloy shell precision turning | Surface roughness Ra0.4μm, straightness 0.01mm/m |
| Energy Equipment | Turning of welding layer of nuclear power valve | Continuous machining for 4 hours without chipping, temperature stability ±15℃ |
| Medical Devices | Cobalt-chromium alloy bone screw turning | Achieve φ0.8mm microstructure processing with a tolerance of ±0.005mm |
Whether you need general-purpose Cutting Carbide Inserts or specialized Inserts for Turning, our 32 years of carbide research and development experience can help you break through machining bottlenecks!
